Bund Water Control Unit Semi ATEX

Product Information

The mains-powered interceptor alarm system with three probe sensors is installed within the separator to automatically detect the levels of oil, silt and liquid within. If excessive levels are reached, the alarm activates a klaxon or beacon to provide an audible or visual notification of excessive liquid levels.

For more remote applications, an alert can be transmitted by text message. Alarm warnings allow you time to take corrective action ensuring the safe and economic operation of separators, preventing oil passing through the separator and polluting watercourses which may result in expensive fines and clean-up costs.

The alarm system and sensors guarantee an increased level of safety and require simple installation for bespoke monitoring of oil and petrol separators.

We can tailor your separator alarm to your requirements by displaying your name and contact details on the liquid crystal display and fitting your custom label (please ask for details).

Specification

• 1no Control Panel (230v)
• ATEX Pump
• 1no Oil Probe with 5m flylead
• 1no Junction Box
• Atex approved: Baseefa 08ATEX0110/1

Benefits

• Warn of excessive levels of oil, liquid and silt
• Reduces waste management costs
• Designed to comply with EN858-1&2 and PPG3
• Can be fitted to interceptors from all manufacturers
• Reduces interceptor servicing costs
• Automated and remote monitoring
• Ensures safe and economic operation of interceptors

Installation, Commission and Service

Within the contracted service visit, we will be undertaking the following:

Bund Water Control Unit

• Take note of the display and record.
• Disconnect from mains supply.
• Check PCB for any signs of damage
• Check links on the Bund Water Control Unit PCB are in the correct position for standard operation ie. Pump inhibit on Deadstop, Pump enable on Float Switch
• Check all cables are still connected and are wired correctly
• Clean probes and ensure that the conductivity area is free from debris, oils and grease
• Clean and maintain filter and pump area
• Check sump area is free from debris
• Check “High Water” alarm o/p.
• Check “High Oil” alarm o/p.
• Check “High Level” alarm o/p.
• Check “Pump Failure” alarm o/p
• Extend the service warranty for a further 12 months from the visit date.

All the above steps are vital for any company to meet the Environmental Agencies Guidelines (PPG2) and the Oil Storage Regulations 2001 for efficient pollution prevention control and to enable your equipment to function correctly.